Shows how to create a 3D sketch that is comprised of a spline made of three points followed by an arc.
Units.Current = UnitTypes.Inches P = Part('My Part') # create 3d spline from a set of interpolation points Path = P.Add3DSketch('Path') Points = [0.6, -0.6625, 0.0] Points.extend([0.6, -0.6625, -0.2175]) Points.extend([0.6, -0.8125, -0.6795]) Path.AddBspline(Points) # arcs are counter clockwise, so to get a clockwise arc the start and end points are swapped Path.AddArcCenterStartEnd(-5.6634, -3.92, -0.6795, 0.6, -7.0275, -0.6795, 0.6, -0.8125, -0.6795)