Support Center

Copies a sketch from the X-Y plane to the Y-Z plane.

MyPart = Part('MyPart')
Sketch1 = MyPart.AddSketch('Sketch1', MyPart.GetPlane('XY-Plane'))
Sketch1.AddLines([0, 10, 0, 0, 10, 0, 10, 10], False)
Sketch1.AddArcCenterStartAngle(5, 10, 10, 10, 180, False)
 
Sketch2 = MyPart.AddSketch('Sketch2', MyPart.GetPlane('YZ-Plane'))
Sketch2.CopyFrom(Sketch1)